Welcome to HDDGuarder.com

1��

Check if there are USB inserted in your PC; if yes, Kindly power off , plug out USB key then reboot.

2��

If there are no USB device on your PC, kindly check by pressing

, then you could enter into Windows, because if the Hard disk was not made partition and formatted, it could not be installed recovery card.

3��

If your hard disk had been made partition and formatted, also install Opertion System well, Kindlypower off, plug out the card, then do as follows:

	The following operations need professional computer knowledge, it is better to be done or assisted by career man, Normal users DO NOT make the following by yourself.
(1)	Backup all the important data into other PC or USB key. Download Sysclr.exe from http://www.hddguarder.com/newhdd/Download.asp
(2)	Boot into Pure DOS, Windows98 DOS.
(3)	Run SysClr ALL.
(4)	Rebooting, reset CMOS option: HDD Detection as AUTO, then enter into Pure DOS.
(5)	Make partitions with FDISK. Kindly noted that: Do not make partitions with any other software.
(6)	Rebooting, install Operation system, such as Windows 2000/XP/2003��
(7)	Power off. Insert Hddguarder card into Slot, power on again.

4��

If there are still the screen appears, kindly contact with your supplier.