HomeProducts SupportSolutionsPartnersDownloadDistributor WantedFAQContact Us
 
faq
Q: Without Installation menu  
A:
First Solution At first,kndly check if the card is well inserted into PCI slot it should be well touch with Slot, meanwhile, try the following so to be sure the touch are closed enough:
  1. Clean the dust in the Slot.
  2. Change other PCI slot to try.
  3. Try to plug in and out some times.
  4. Clean the golden part on PCB, you could clean with 95% chroma  alcohol or soft rubber.
  5. Change another pc of card.
  6. All operation should be anti static.
Second Solution Check if there are card installed already. When Booting, continual  pressing   £¬but do not keep touch  , it is better to press two times for every one second. If then there are Hotkey menu appears, kindly refer to next Questions.
Third Solution
Change Boot mode.  When Booting, continual  pressing    £¬but do not keep touch  , it is better to press two times for every one second. If PC work, the following menu will appear:

 
after inputing the default password function then press , the boot mode will be change as 2. then PC will reboot Automatically.If after change Boot mode as 2, while still without installation menu appears, kindly change back the boot mode as default 1.
Fourth Solution Reset CMOS ¡£Kindly reset CMOS as the following items, then repeat the above three methods to check if there are installation menu appears:
  1. Update the sequence of booting, set Network booting as first one:
    Case one£ºA MMX 233 PC£¬its CMOS setting option:
    ͼ1
    Case two£ºA PII 800 PC:
    ͼ2
    Case Three£º Intel 815:
    ͼ3
    Case Four£ºASUS P4P800:
    ͼ4
  2. Set¡°Interrupt 19 Capture¡±or similar option as¡°Enabled¡±£¬as the following:
    ͼ5
  3. Set¡°Plug & Play O/S¡±or similar option as ¡°Yes¡±or¡°Installed¡±, as the following:
    ͼ6
  4. Close Fast boot , as the following: ¡°Intel(R) Rapid BIOS Boot¡±and¡°Quick Boot¡±.
    ͼ7
  5. Close Virus Warnning .such as¡°Virus Warnig¡± or¡°Boot Virus Detection¡±¡£
  6. Open PCI slot. For some motherboard, its CMOS default setting is to close thePCI slot.
    Case 1£º

    case 2£º
Closing If you have made all the above operations, while there are still no installation menu appears, it means the card is not compatible with your PC. Kindly contact with your supplier.

Free Applications
ezLock™ 2.00
ezTime™ 3.70
ezConfig™ 2.00
ezControl™ 6.05
ezMove™
ezCopy™ 5.01
ezBoot™ 7.00
more...
Product Solutions
Recovery
PC remote management
Multi users Protection
Multi system Protection
PXE protection
more...
 Copyright © HDDGuarder Technology Co., Ltd.  1997-2006  All rights reserved! | Home | Contact Us | About Us
s